| M1A1 76mm Gun Barrel | MicroWorld (#72-063) |
| Article by Doug Chaltry; last updated 12 October 2024 | |
 <<click for larger image>> |
|
| Modeling the Sherman Tank in 1/72nd Scale |
| M1A1 76mm Gun Barrel | MicroWorld (#72-063) |
| Article by Doug Chaltry; last updated 12 October 2024 | |
<<click for larger image>> |
|
| Turned brass barrel
with a 3D-printed resin muzzle brake. Beautifully printed
and milled parts. Although it appears that you could
optionally leave off the muzzle brake, that is actually
not true, as the rear portion of the brake screwed onto
the end of the barrel, the threads of which are not
depicted on this piece. I didn't assemble the parts for
this review because there are a couple of resin nubs on
the rear of the brake that need to first be filed off
(and my file is on my workbench in another room, and I'm
lazy, so...).
|
| Modeling the Sherman Tank in 1/72nd Scale |
